| AHPW |
FIRST LEG THICKNESS |
0.032 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.187 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.180 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.170 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.390 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLK |
FIRST LEG LENGTH |
0.375 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.390 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.217 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.032 INCHES NOMINAL |