| ADLL |
SECOND LEG LENGTH |
6.375 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
4.750 NOMINAL INCHES |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE ONE SIDE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.219 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.438 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.688 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.438 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.063 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.000 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.188 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.875 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.125 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.438 INCHES NOMINAL |