| AHLN |
SECOND LEG HOLE DIAMETER |
0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758,SAE,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.130 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.860 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.460 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.650 INCHES NOMINAL |
| AHLR |
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
1.300 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.130 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.250 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.350 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.540 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| MATT |
MATERIAL |
STEEL COMP 4130 |