| AHLK |
FIRST LEG HOLE DIAMETER |
0.197 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFP |
FIRST LEG END RADIUS |
0.570 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLF |
SECOND LEG WIDTH |
0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
FORGED |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.570 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHQN |
FIRST LEG WIDTH |
0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.780 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
STEEL |
| AHPW |
FIRST LEG THICKNESS |
0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.920 INCHES MINIMUM AND 1.960 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |