| FEAT |
SPECIAL FEATURES |
FIRST LEG HOLE THD,5/8-11-UNC-2B |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-6808 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
2.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
1.000 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.625 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
5.000 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
WELDED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AGAV |
END ITEM IDENTIFICATION |
USED ON AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQN |
FIRST LEG WIDTH |
5.000 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| SFTT |
SURFACE TREATMENT |
ZINC |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.812 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ADLL |
SECOND LEG LENGTH |
3.500 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.812 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
1.000 INCHES NOMINAL |