| AHPX |
SECOND LEG THICKNESS |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.1450 INCHES MINIMUM AND 0.1555 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.307 NOMINAL MILS AND 0.317 NOMINAL CENTIMETERS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND THREADED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLF |
SECOND LEG WIDTH |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.0849 INCHES MINIMUM AND 0.0939 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHQN |
FIRST LEG WIDTH |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |