| AHLG |
SECOND LEG CORNER RADIUS |
0.060 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.107 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ONE 0.945 TO 0.955 IN. DIA. HOLE WITH THREE EQUALLY SPACED SLOTS 0.110 TO 0.130 IN. WIDE CENTRALLY LOCATED BETWEEN MTG HOLES IN SECOND END |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.120 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.901 INCHES MINIMUM AND 0.911 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.116 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.150 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AJFP |
FIRST LEG END RADIUS |
0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.901 NOMINAL MILS AND 0.911 NOMINAL CENTIMETERS |
| ADLK |
FIRST LEG LENGTH |
0.925 INCHES MINIMUM AND 0.965 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 301 |
| ADLL |
SECOND LEG LENGTH |
2.630 INCHES MINIMUM AND 2.690 INCHES MAXIMUM |