| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| ADLL |
SECOND LEG LENGTH |
2.653 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.342 INCHES MINIMUM AND 0.351 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.217 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLK |
FIRST LEG LENGTH |
1.562 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.052 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.500 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 8630 |
| AHPX |
SECOND LEG THICKNESS |
0.052 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |