| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.493 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLL |
SECOND LEG LENGTH |
0.555 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
FORMED |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.215 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AHQA |
CENTER SECTION WIDTH |
0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.440 INCHES MINIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AHPZ |
CENTER SECTION HEIGHT |
1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |