| AHLK |
FIRST LEG HOLE DIAMETER |
0.218 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE |
| AJFQ |
SECOND LEG END RADIUS |
0.100 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.100 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.260 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.520 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.520 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
ENG1NE,TURBOSHAFT |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.261 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 321 |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.870 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.700 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |