| AHPX |
SECOND LEG THICKNESS |
0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
78.5 DEGREES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLG |
SECOND LEG CORNER RADIUS |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
ENGINE, AIRCRAFT J-52 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.272 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.125 INCHES MINIMUM AND 1.155 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
1.325 INCHES MINIMUM AND 1.357 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AHMA |
SECOND LEG SLOT WIDTH |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |