| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.281 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.141 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.113 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.093 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.625 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.650 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.000 NOMINAL INCHES |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.141 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.281 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.202 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.093 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |