| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.347 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.746 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.560 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/8 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
4.710 INCHES MINIMUM AND 4.730 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.965 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |