| AHLF |
SECOND LEG WIDTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.435 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.480 NOMINAL INCHES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.157 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.038 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.038 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1008 OR STEEL COMP 1018 OR STEEL COMP 1015 OR STEEL COMP 1009 OR STEEL COMP 1020 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A611 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A109 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A635 ASSN STD 3RD MATERIAL RESPONSE |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.360 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.100 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.800 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |