| AJFP |
FIRST LEG END RADIUS |
0.440 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/11,T6511 FED SPEC SINGLE MATERIAL RESPONSE |
| AJFQ |
SECOND LEG END RADIUS |
0.440 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
0.800 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.094 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLY |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
1.030 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHPX |
SECOND LEG THICKNESS |
0.094 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.880 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.094 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.600 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.880 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.850 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AHLX |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.820 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |