| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
2.280 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLL |
SECOND LEG LENGTH |
2.070 INCHES MINIMUM AND 2.150 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.650 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AHPX |
SECOND LEG THICKNESS |
0.082 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
3.150 INCHES MINIMUM AND 3.190 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.530 INCHES MINIMUM AND 1.610 INCHES MAXIMUM |