| AHLL |
FIRST LEG SLOT LENGTH |
0.278 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLM |
FIRST LEG SLOT WIDTH |
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHQN |
FIRST LEG WIDTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| ADLL |
SECOND LEG LENGTH |
1.047 INCHES MINIMUM AND 1.077 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AJFP |
FIRST LEG END RADIUS |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AJFQ |
SECOND LEG END RADIUS |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |