| AHRC |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
4.500 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.312 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.438 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHRD |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
4.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
REINFORCEMENT LOCATED ON RIGHT SIDE,FINISH MUST BE ACID RESISTANT GRAY |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.312 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.719 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| STYL |
STYLE DESIGNATOR |
RIGID |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
4.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.000 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
WEB OVERALL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.719 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.438 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| ADLK |
FIRST LEG LENGTH |
11.250 INCHES NOMINAL |