| AHLF |
SECOND LEG WIDTH |
0.375 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS C FED SPEC SINGLE TREATMENT RESPONSE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.218 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.155 NOMINAL MILS AND 0.159 NOMINAL CENTIMETERS |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.172 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.375 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.123 INCHES NOMINAL |
| CSSZ |
SECOND LEG OFFSET ANGLE |
30.0 DEGREES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.030 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.030 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CSSQ |
FIRST LEG ANGLE |
126.5 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
OFFSET ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.547 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.122 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |