| AHQP |
FIRST LEG CORNER RADIUS |
0.156 INCHES MINIMUM AND 0.218 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.275 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
WROUGHT |
| ADLK |
FIRST LEG LENGTH |
1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.625 NOMINAL INCHES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQN |
FIRST LEG WIDTH |
1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.312 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.494 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.844 INCHES MINIMUM AND 1.906 INCHES MAXIMUM |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.275 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC AND ENAMEL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| MATT |
MATERIAL |
STEEL COMP 4130 |