| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
2.160 INCHES MINIMUM AND 2.220 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.505 INCHES MINIMUM AND 1.515 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.020 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.000 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
2.160 INCHES MINIMUM AND 2.222 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66,AISI/SAE 1020 FED STD SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM |