| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.220 INCHES NOMINAL |
| CSSY |
FIRST LEG OFFSET ANGLE |
30.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.618 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4910 ASSN STD SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.375 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.604 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.118 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.725 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
OFFSET DOUBLE ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHQB |
CENTER SECTION THICKNESS |
0.056 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |