| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| FEAT |
SPECIAL FEATURES |
CHAMFER OPPOSITE SECOND LEG END WIDTH,ONE HOLE IN SECOND LEG 0.779 IN. MIN,0.789 IN. DIA. MAX |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
9.750 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.000 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
17.000 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.529 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHQN |
FIRST LEG WIDTH |
17.000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
4.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
3.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
10.030 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.000 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1010 OR STEEL COMP 1020 |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |