| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.340 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.128 INCHES MINIMUM AND 0.131 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
EXTRUDED |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| ADLL |
SECOND LEG LENGTH |
0.810 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.470 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.620 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
1.248 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.937 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.150 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.248 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |