| SFTT |
SURFACE TREATMENT |
OXIDE FILM |
| FEAT |
SPECIAL FEATURES |
FOUR SLOTS CUT INTO FIRST LEG |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.750 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.219 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| AHLR |
SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH |
2.688 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
10.440 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/9,T52 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.190 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
8.062 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
2.688 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
10.440 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.410 INCHES NOMINAL |