| ADLK |
FIRST LEG LENGTH |
0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.957 INCHES MINIMUM AND 0.967 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
0.719 INCHES MINIMUM AND 0.789 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
CAST |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.719 INCHES MINIMUM AND 0.789 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.136 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
HEAT TREATMENT: T-3 OR T-4 SOLUTION HEAT TREATED |
| AJFQ |
SECOND LEG END RADIUS |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.407 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 T3 OR T4 FED SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET CENTER SECTION |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |