| AHQN |
FIRST LEG WIDTH |
7.500 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE |
| AHLK |
FIRST LEG HOLE DIAMETER |
1.3128 INCHES MINIMUM AND 1.3138 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16233,TYPE M,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-16974 MIL SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AARN |
FABRICATION METHOD (NON-CORE) |
FORGED |
| FEAT |
SPECIAL FEATURES |
FOUR ADDITIONAL 0.500 IN. DIA HOLES SECOND LEG |
| AHPX |
SECOND LEG THICKNESS |
0.440 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
7.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
3.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.625 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.498 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.000 NOMINAL INCHES |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
3.750 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
1.750 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.875 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.625 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.940 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.440 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| MATT |
MATERIAL |
STEEL COMP 4340 |