| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.193 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
2.730 INCHES MINIMUM AND 2.790 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766,CLASS 321,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.730 INCHES MINIMUM AND 2.790 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.050 INCHES MINIMUM AND 1.110 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.100 INCHES MINIMUM AND 1.160 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |