| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.790 NOMINAL INCHES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.342 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
2.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.490 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
EXTENDED FLAT |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.960 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AGAV |
END ITEM IDENTIFICATION |
TF33-PW-100/100A ENGINE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE |
| ADLK |
FIRST LEG LENGTH |
2.150 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.620 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
2ND LEG 1 HOLE ON EXTENDED FLAT |
| AFJH |
FURNISHED ITEMS (NON-CORE) |
2 NUT PLATES P/N BACN10JP3B |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.290 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.350 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.100 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |