| AHLG |
SECOND LEG CORNER RADIUS |
0.280 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.280 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
2.980 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.960 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.342 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
TF33-PW-100/100A ENGINE |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AHLF |
SECOND LEG WIDTH |
2.480 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AFJH |
FURNISHED ITEMS (NON-CORE) |
NUT PLATES,P/N BACN10JP3A |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.480 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.500 INCHES NOMINAL |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.960 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |