| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.156 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
0.355 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND THREADED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD ALL MATERIAL RESPONSES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| ADLL |
SECOND LEG LENGTH |
1.282 INCHES MINIMUM AND 1.342 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.164 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.532 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 1010 OR STEEL COMP 1020 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |