| SFTT |
SURFACE TREATMENT |
PLASTIC POLYVINYL CHLORIDE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.260 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/6,H323 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7,H32 FED SPEC 2ND MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
22.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.000 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| ADLK |
FIRST LEG LENGTH |
1.750 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-20689,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
22.000 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.370 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
15.250 INCHES NOMINAL |