| AHPW |
FIRST LEG THICKNESS |
0.094 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.060 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/6,H323 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/7,H32 FED SPEC 2ND MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.530 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.094 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.380 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.190 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.535 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.060 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.567 INCHES MINIMUM AND 0.582 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |