| AHQN |
FIRST LEG WIDTH |
0.650 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.187 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.139 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.390 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.400 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.325 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.160 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.089 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.125 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.139 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLF |
SECOND LEG WIDTH |
0.650 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.187 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |