| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| AHPW |
FIRST LEG THICKNESS |
0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
1.910 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHPX |
SECOND LEG THICKNESS |
0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.234 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
LEFT HAND MTG |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.360 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
0.800 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.216 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.160 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHMA |
SECOND LEG SLOT WIDTH |
0.260 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4,T0 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.910 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.310 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.500 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |