| AHLK |
FIRST LEG HOLE DIAMETER |
0.096 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.086 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.125 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 3003 |
| ADLL |
SECOND LEG LENGTH |
0.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.247 NOMINAL MILS AND 0.253 NOMINAL CENTIMETERS |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/2,H14 FED SPEC SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.145 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.115 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |