| AHLN |
SECOND LEG HOLE DIAMETER |
0.086 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.320 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.300 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.530 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHQN |
FIRST LEG WIDTH |
0.300 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
TIN |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.150 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND THREADED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-T-10727,T1 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.200 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.085 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.160 INCHES NOMINAL |