| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541,TYPE 2,GRADE C,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.425 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.450 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.874 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.128 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.225 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.556 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.225 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.225 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AFJH |
FURNISHED ITEMS (NON-CORE) |
CLINCH NUT |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.155 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.217 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |