| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.560 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| AHPW |
FIRST LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.130 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.250 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.469 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQN |
FIRST LEG WIDTH |
2.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.630 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLH |
SECOND LEG END WIDTH |
1.490 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |