| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.656 NOMINAL INCHES |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.560 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
0.500 INCHES NOMINAL |
| AJFS |
SECOND LEG SIDE RADIUS |
0.750 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
CAST |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| CSSQ |
FIRST LEG ANGLE |
115.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.625 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.093 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.750 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.093 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.375 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| ADLK |
FIRST LEG LENGTH |
2.112 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 355.0 AND STEEL COMP 1025 |
| AHLF |
SECOND LEG WIDTH |
1.031 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.1875 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.656 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.206 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.720 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.204 INCHES NOMINAL |