| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.875 NOMINAL INCHES |
| ADLK |
FIRST LEG LENGTH |
1.140 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-E-529 CLASS A,COMP G FED SPEC SINGLE TREATMENT RESPONSE |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
TURNED EDGE ONE SIDE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.810 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ENAMEL |
| FEAT |
SPECIAL FEATURES |
RIGHT HAND; COLOR YELLOW FED STD 595 NO. 23538 |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.281 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.310 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |