| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
GF14A FINISH NO. 161 FSCM 26512 MFR REF SINGLE TREATMENT RESPONSE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.625 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NUT |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.625 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.688 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.188 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4,T62 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.146 INCHES MINIMUM AND 0.152 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.188 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PRIMER |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.156 INCHES NOMINAL |