| CWPD |
FIRST LEG CHAMFER ANGLE |
50.0 DEGREES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
4.750 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-22141 MIL SPEC 2ND MATERIAL RESPONSE AND QQ-S-741 FED SPEC 1ST MATERIAL RESPONSE AND MIL-S-22141 MIL SPEC 3RD MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHLM |
FIRST LEG SLOT WIDTH |
0.656 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.000 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.000 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
NSN 2350-01-048-5920 |
| ADLL |
SECOND LEG LENGTH |
5.620 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
4.000 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
2.585 INCHES MINIMUM AND 2.595 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.620 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.875 INCHES MINIMUM AND 0.938 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.875 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
2.000 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
2.370 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
3.750 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.375 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST LEG IS MACHINED ALONG LENGTH PER DRAWING |
| MATT |
MATERIAL |
STEEL OR STEEL COMP 1020 OR STEEL COMP 1030 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |