| AHLM |
FIRST LEG SLOT WIDTH |
0.218 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.219 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.125 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.797 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ADLK |
FIRST LEG LENGTH |
1.250 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLL |
FIRST LEG SLOT LENGTH |
0.375 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.125 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.600 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |