| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-225/8 FED SPEC 3RD MATERIAL RESPONSE |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
6.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.375 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
13.469 INCHES MINIMUM AND 13.531 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| FEAT |
SPECIAL FEATURES |
SECOND LEG HAS FOUR HOLES WITH THIRD HOLE 3.375 IN. FROM FOURTH HOLE ALONG WIDTH |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 TY 2 GR C CL 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLF |
SECOND LEG WIDTH |
13.469 INCHES MINIMUM AND 13.531 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.234 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |