| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
4.360 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
4.360 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.372 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.400 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
2.125 NOMINAL INCHES |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.625 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.555 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.208 INCHES MINIMUM AND 0.228 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 304L OR STEEL COMP 347 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.125 INCHES NOMINAL |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH SIDES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQV |
FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
3.250 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
2.400 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
2.870 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5512 ASSN STD 2ND MATERIAL RESPONSE |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.312 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |