| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
0.12 RADIANS NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.460 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.310 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.960 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ADLK |
FIRST LEG LENGTH |
0.620 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.370 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,TEMP T3 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.126 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |