| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.310 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
2ND LEG END CHAMFERED 45 DEG BY 0.100 |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI 416 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLL |
FIRST LEG SLOT LENGTH |
0.720 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
1.100 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.2006 INCHES MINIMUM AND 0.2066 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.100 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.850 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AJFQ |
SECOND LEG END RADIUS |
0.310 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| ADLL |
SECOND LEG LENGTH |
1.350 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.199 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 416 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| AHLF |
SECOND LEG WIDTH |
1.700 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.290 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.100 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.520 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.780 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
SHEAR PIN PLATE-TRAILING EDGE FAIRING,INBOARD AND OUTBOARD STRUT |
| ADLK |
FIRST LEG LENGTH |
0.650 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.700 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.550 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |