| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERBORED |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.205 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.010 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| AJFP |
FIRST LEG END RADIUS |
0.250 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1ST LEG HOLE COUNTERBORED 0.375 IN. MIN AND 0.395 IN. MAX DIA,0.025 IN. MIN AND 0.030 IN. MAX DP; NUT ATTACHED TO 1ST LEG HOLE; 2ND LEG END SLOT,0.170 IN. W,0.300 IN. LG |
| AHQB |
CENTER SECTION THICKNESS |
0.070 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4901 ASSN STD SINGLE MATERIAL RESPONSE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
JET ENGINE,AIRCRAFT |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.070 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.565 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.690 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.070 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.570 INCHES NOMINAL |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |