| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.625 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
26512-GB11E4-2 MANUFACTURERS SPECIFICATION |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
NUT |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.000 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.120 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST LEG ONE OTHER HOLE WITH DIA 0.172 IN. MIN,0.178 IN. MAX |
| AHLG |
SECOND LEG CORNER RADIUS |
0.190 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.187 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| SFTT |
SURFACE TREATMENT |
PRIMER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.190 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.620 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
GF14A 161 FSCM 26512 MFR REF SINGLE TREATMENT RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |